by Here is a topic that is very useful for those who have their own vehicle. Parking sensing system can be set very easily in a vehicle without parking sensor. For that, this product called Assistant Parking Sensor, which is available at a very low price, can be purchased from Amazon. The link to purchase is given below. Its price is around 540 rupees only. We can buy the sensor according to the color of the vehicle from Amazon.
They provide a really good build quality and quality for this one product called Assisted Parking Sensor. They come in this little box with the bit to fix it on the bumper. Also several wires are available including the sensing unit. First remove the rear bumper of the car. Loosen the screws at the bottom of the number plate on the left side and right side of the bumper. After removing the bumper, move the tail lamp on the left side.
After removing the tail lamp, cut the red wire inside with a small blitz. Then connect the sensor’s power line red and black to the wire. After that, check if the sensor is working. A small hole can be seen above the tail lamp. That way we can take the power line connection of the reverse sensor.
Then take this connection through. After this, mark a length of 50 cm from the ground level of the car. In this way a gap of 15 cm should be marked between each sensor. Now let’s fix the sensor. Watch the given video to understand how to fix. If you like the video, please share it with others.
Order link :click here
