by A water pump can be made using the old mixer grinder we have at home. Let us understand how. We can make a good water force from this. Anyone can make it very easily. Take an old mixie jar that you haven’t used for the first time at home. Then peel off the black part from the bottom of the jar. Next a two inch end cap is needed.
Then a two inch to one inch reducer cap is needed. Also required is a two inch piece of PVC pipe. Cut it into three inch pieces. Next take the end cap and mark its center point. Then take a compass and measure 1.1 cm and draw a circle. Cut the drawn part. Next drop the mixie’s jar adapter into the cut and tighten it.
After gathering all the necessary materials, begin by sticking the end cap with glue to make it waterproof. Then take the half-inch piece of pipe and cut the tip in a V shape. Next, create a hole in the side of the end cap and insert two inches of PVC pipe into it. Drill a hole in the PVC pipe and insert the half-inch pipe into it. This will help ensure the end cap is securely fixed and waterproof.
To make a water pump using a Mixi, start by pasting Araldite or any other gum on the two inch to one inch reducer. Cut the reducer into the necessary shape. Next, make an impeller from an iron sheet, cutting it into a round shape. Then, watch the given video and understand how to prepare the water pump using the Mixi. Once you have finished watching the video and understand the instructions, share it with others if you find it useful.
